Skip links

Downloads & Help

Downloads

Here you can find various downloads for your course.
Click on the buttons below to download the file requested by your trainer

Gas training material Electrical training material

These will be unlocked by the trainer

services-feature4

Electricity at work regs. (FREE)

For electrical courses
Download

This is a very important book for electricians to understand regarding working on or near live electrics and your responsibility under the health and safety at work act.

The purpose of this guidance is to highlight what can be done by dutyholders to achieve electrical safety compliance with the duties imposed by the Regulations.

It is relevant to all work activities and premises except certain offshore installations and particular ships. Of particular relevance to dutyholders, it will also be of interest and practical help primarily to engineers (including those involved in design, construction, operation or maintenance of electrical systems and equipment), technicians and their managers.

Gas safety installation & use regulations 2018 (FREE)

For Gas courses
Download

The Gas Safety (Installation and Use) (Amendment) Regulations 2018 came into force on 6 April 2018.

This Approved Code of Practice and guidance gives advice on how to meet the requirements of GSIUR and the amending regulations.

This guidance is for anyone who may have a duty under the Gas Safety (Installation and Use) Regulations 1998, including those who install, service, maintain or repair gas appliances and other gas fittings. Landlords also have duties under these regulations.

Viper Gas book

Required for all students doing our MLP Gas course.
Purchase

This Viper book can be purchased from this website or bought from us discounted for £80.

This book will be used a lot during the course and will also be a crucial part of your tool kit for many years after. Recommended by the Gas trainer.

Chapters (Revision No):

  • Health and Safety (16.3)
  • Regulations and Acts (6.1)
  • Combustion (10.2)
  • Carbon Monoxide & Combustion Performance Testing (4.1)
  • Gas Controls (14.2)
  • Open Flues and Room Sealed Flues (21.1)
  • Ventilation (9.3)
  • Measurement of Gas Pressure and Tightness Testing (14.3)
  • Re-Establish Gas Supplies (Purging After Testing) (15.3)
  • Checking Pressures and Internal Pipe-Sizing (6.0)
  • Checking and Setting Burner Pressure and Gas Rates (11.0)
  • Installation of Pipework and Fittings (8.1)
  • Low Pressure Meter Installations (19.1)
  • Statutory Requirements Incorporating Gas Industry Unsafe Situations Procedure (8.0)
  • Central Heating (17.0)
  • Space Heaters (13.1)
  • Gas Cookers (9.1)
  • Warm Air Heaters (7.2)
  • Water Heaters (11.0)
  • Tumble Dryers (14.1)
  • Fault Finding Fan Flued Combination Boilers (10.0)

Guidance note 38 (GS38)
Free

Electrical test equipment for use on low voltage electrical systems
Download

This guidance note is aimed at people (including electricians, electrical contractors, test supervisors, technicians, managers, tradespeople and/or appliance retailers/repairers etc) who use electrical test equipment on low voltage electrical systems and equipment.

The Electricity at Work Regulations 1989 require those in control of all or part of an electrical system to ensure it is safe to use and maintained in a safe condition.

The Regulations permit few circumstances where it is acceptable for live working activities to be carried out on electrical equipment or systems, this includes electrical testing and fault finding. Wherever possible, all work on electrical systems should be carried out with the system dead. This includes electrical testing where dead tests are often as effective as live measurements. This document provides advice and guidance on how to achieve this.

Guidance note 3

Guidance for electricians in a simplified step by step procedure on inspection and testing used for all electrical courses.
Purchase

Guidance Note 3: Inspection & Testing is a fundamental guidance book for all those involved with the testing and inspection of electrical installations. It also contains essential guidance for those studying for inspection and testing qualifications and has been fully updated to BS 7671:2018. The 18th Edition of the IET Wiring Regulations published in July 2018 and came into effect in January 2019. Changes from the previous edition include requirements concerning Surge Protection Devices, Arc Fault Detection Devices and the installation of electric vehicle charging equipment as well as many other areas.

Purchase

The On-Site Guide is an essential guide to BS 7671. It incorporates the extensive changes in BS 7671:2018, making this a vital guide for keeping up to date. It enables the competent electrician to deal with installations (up to 100 A, 3-phase) providing essential information in a convenient, easy-to-use format. The 18th Edition of the IET Wiring Regulations published in July 2018 and came into effect in January 2019. Changes from the previous edition include requirements concerning Surge Protection Devices, Arc Fault Detection Devices and the installation of electric vehicle charging equipment as well as many other areas.

Free download

Approved Document P contains guidance on electrical safety in dwellings, including detailed information about what procedures need to be in place and who may carry these out, such as when a professional electrician must be hired. Those undertaking electrical works must be considered “competent”, having a complete and proficient understanding of electrical fittings and are able to check safety circuits.

The document details electrical safety to avoid injuries and fires caused by electrical installations, including the design, installation, inspection and testing of any electrical works made within a dwelling.

This document is required for the CPS assessment.

Travelodge Premiere Inn Station Hotel

If your considering saving yourself some cash and wish to to travel to us from other parts of the UK like many others then here are a few links to B&B’s and hotels nearby.

Get in touch for latest course info.

Give us a call